Frame sides

Specification

<

Specification

Elevate your storage with our frame sides. Crafted from durable epoxy-bonded steel, they allow you to build a freestanding drawer unit with ease. Join the frames using our crossbars and fill them up with mesh- or wire drawers. Add frame feet or casters for mobile drawer unit.

Product LineClassic by Elfa

Article number

201028

ColorGraphite

Width (mm)20

Depth (mm)535

Height1040

Technical description

<

Technical description

Frame sides to build a freestanding drawer system. Complement with crossbars and drawers for a complete storage solution.

The drawer system is a floor based system built on frames, crossbars and drawers. Can be placed in e.g. closets and laundry rooms - freestanding and on wheels. Combine drawer units and add accessories to build a storage system fitting your needs and space e.g. under a staircase.

The frame sides can hold up to 4 drawers depending on drawer size. Supplement with a top shelf to create a solid work surface or an extension kit to stack multiple units.

2 metal colours:
White, close to NCS S 0300-N, gloss around 85
“Graphite”, a unique finish close to NCS S 8000-N, gloss around 50
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

Planning drawer system unit depths:
Standard depth is 535 mm
Mini depth is 435 mm

Planning drawer system unit heights (height without frame feet, adjustable feet or casters):
4-runner: 440 mm
7-runner: 740 mm
10-runner: 1040 mm

When stacking drawer system units on top of each other, 30 mm is subtracted from the total height. For example:
440 mm + 440 mm = 880 mm – 30 mm = 850 mm.

Adding frame feet increases the total height by 2 mm.
Adding casters increases the total height by 77 mm.
Adding adjustable frame feet increases the total height by 50-63 mm.

Width:
The following drawers and crossbars are available for drawer system units – Standard and Mini:
W: 35
W: 45
W: 55

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: rubber hammer/mallet and something to protect the floor (carpet, piece of cardboard etc.). If you don’t have a rubber hammer/mallet, you can use a hammer with a wood block to protect the frame.

Before you start: Make sure to secure that you are working on a non-sensitive surface – for example on a carpet or use a wood block or a piece of cardboard under the frames to protect the floor when hammering.

Step 1: Start by turning the frame sides upside down and lining them up next to eachother. Secure that the “runners” (A), the U-shaped channels on the inside of the frames, are pointing inwards.
Step 2: Fasten the crossbars with “double teeth” (B) to the frame side, using the rubber hammer/mallet. The Elfa Logo on the crossbars will read upside down in this position.
Step 3: Turn the structure again.
Step 4: Fasten the remaining crossbars with the “single tooth” and a flat top (C).

When finished, attach casters or frame feet onto the bottom teeth.

When mounting a drawer system on top of another drawer system, use the crossbar extension set (see separate assembly instruction under ""Extension kit"").

Assembly Instructions