Track tool holder

Specification

<

Specification

Keep your tools organized with our versatile Garage+ track tool holder. Designed for hanging equipment with a shaft like spades and pitchforks. Easily secure it onto storage or top tracks, or attach it directly to the wall. Each pack contains 2 holders, offering a practical solution for tidying up your space.

Product LineGarage+ by Elfa

Article number

4700094

ColorMatte grey

Width (mm)83

Depth (mm)81

Height98

Weight Recommendation5 kg

Technical description

<

Technical description

Tool holder suitable for hanging equipment with a shaft. To be fastened in a storage track or top track. Can also be screwed directly into the wall. Come in a 2-pack.

Available as large and small.
* Tool holder large recommended for shafts ranging from a diameter between 30 to 40 mm
* Tool holder small recommended for shafts ranging from a diameter between 20 to 30 mm

Hook holder made in PA6 (nylon and fiberglass), with a firm locking mechanism towards the storage track.
The grip made from flexible TPE-plastic material with a textured, ribbed surface, securing that the stored items are kept in place.
Hook in 5 mm steel wire.

Colour:
Hook in Matte Grey NCS S 7500-N
Hook holder attachment in black NCS 9000-N
Grip in NCS 9000-N

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will help you determine potential placements of the track tool holder.

The intended equipment you want to store in the tool holder determines the placement.
For example, if you want to store equipment with a long shaft, make sure that the hook is placed high enough in the system to make room for the shaft.

Also, ensure that the equipment isn't heavier than the 5 kilo weight recommendation.

Note: If you aim to mount the hook directly to the wall, make sure to identify where there is an available stud to fasten the hook in (and adjust your planning if necessary).

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

When mounting on a storage track or top track:

Step 1: Turn the lock counter-clockwise to open the lock.

Step 2: Position the top of the hook over the top edge of the storage track/top track and pull it down into place.

Step 3: Turn the lock clockwise to close.

When fastening directly to the wall:

Step 1: Identify the position on the wall where you want to mount. If mounting on a plaster wall, identify where there is a stud in the wall.

Step 2: Position in place and, using adequate screws for your wall type, fasten through both screw holes.

Step 3: Turn the lock clockwise to close.

Assembly Instructions

Large track tool holder Matte grey, pkg/2

45,90

Needs To Have

Top track 1248 mm Matte grey

Top track 1855 mm Matte grey

Storage track W: 60 Matte grey

Track standard fittings Matte grey, pair

Screw and plug, pkg/10

Drywall anchor, pkg/5

Nice To Have