Closet rod holder frame-wall

Specification

<

Specification

Create space for hanging clothes between a drawer system and the wall with our closet rod holder frame-wall. Hook one holder easily onto the frame side and screw the second holder onto the wall. Then simply plug in the closet rod into the holders. Come in a 2-pack.

Product LineClassic by Elfa

Article number

222610

ColorWhite

Width (mm)39

Depth (mm)37

Height116

Technical description

<

Technical description

Closet rod holder for installation of closet rod between a drawer system unit and a wall. One holder mounts onto frame side, the other is screwed into the wall. Come in a set of 2.

Made of plastic. The set includes screws (PZ2 16 x 3,5 mm).

Provides a possibility to create a free-standing drawer system solution with a hanging function.
Easy mounting on drawer system frame side through snap function.

Planning rules

<

Planning rules

Maximum width of the closet rod should be 900 mm.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: screwdriver, leveller.

Before you start: Finish assembling the drawer system unit with frame sides, crossbars and drawers. If needed, cut the closet rod to the desired width.

Step 1: Click on the frame side piece (A) onto the outer frame side by snapping it onto the outside of the top two runners. Aim for a position close to the middle of the runners in order to get even hanging space back/forward.

Step 2: Click the closet rod (C) into place into the frame side piece (A).

Step 3: Place the drawer system unit in the desired position and then click in the closet rod into the wall piece (B). Preferably, use a leveller when aiming to get the right position for the closet rod holder wall piece.

Step 4: Mark in the holes of the wall piece, where to place it on the wall. Remove the closet rod from the holder and then screw the wall piece into the wall.

Step 5: Click the closet rod into place between the closet rod holders.

Assembly Instructions