Drywall anchor

Specification

<

Specification

Securely install your storage solutions on plaster walls with wall thickness ranging from 9 to 26 mm using our drywall anchor. This pack includes five anchors, ensuring you have enough for your installation needs.

Product LineClassic by Elfa

Article number

471815

ColorWhite

Width (mm)14

Depth (mm)80

Height14

Technical description

<

Technical description

Screw and anchor set for installation on drywalls with a wall thickness between 9-26 mm (23/64""-1 2/64""). Come in a 5-pack.

Anchor diameter: 10 mm (25/64"")

The set includes:
* 10 pcs anchors
* 10 short add-on pieces for the anchor
* 10 medium add-on pieces for the anchor
* 10 long add-on pieces for the anchor
* 10 pcs screws

Planning rules

<

Planning rules

In the planning phase, be sure to examine your wall type to find out which type of hardware your wall requires.

The Elfa Planner will not automatically add the needed hardware to your planned solution.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: Drilling machine with a 10 mm drill bit and screwdriver with a PH 2 bit for the screw.

Important NOTE: Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these wires or lines, please contact a professional electrician or plumber before drilling.

The drywall anchor packaging includes three versions of grey add-on piece for the plug, a short, a middle and a long.

When mounting a top track: Use the short add-on piece.
When mounting wallband: Use the middle add-on piece.
When fastening a hang standard or extension hang standard to the wall: Use the longer piece when fastening through the holes in the hang standard.

Step 1: Start by drilling a hole with a small drill bit (2-3 mm). If you, for example, hit a wooden stud, don't use the drywall anchor in this position - attach with a wood screw. If you hit a hollow part of the wall, enlarge the hole with a 10 mm drill bit.

Step 2: Add the adequate add-on piece into the plastic plug and push the plastic plug into the hole.

Step 3: Mount with the screw using a PH 2 bit.

Assembly Instructions