Slope cut

Specification

<

Specification

Sloping sliding doors from Elfa are a customised solution for rooms with sloping ceilings, where the door is cut at an angle to follow the slope of the ceiling - perfect for creating hidden storage in difficult-to-furnish spaces.

Product LineGarage+

Article number

M0054

Technical description

<

Technical description

A guide arm can be mounted on the rear side of the obliquely cut sliding door. The guide arm is attached and slides in a guide rail to be mounted on the front of a melamine or wire shelf for stability. For the Artic model, one door per side can be bevelled and for the Vista model, two doors per side can be bevelled. The Vista door model can be bevel cut to point, while the Articneeds a straight surface at the top of 90 mm. It is important to: Before production takes place, you as an end customer must approve Elfas design proposals.

Planning rules

<

Planning rules

Tempered glass cannot be used in the bevel cut field. Bevel cutting cannot be combined with Free-hanging doors or Soft closing.

Safety and care

<

Safety and care

Safety

Maximum load capacity per section: 200 kg (Classic by Elfa, click-in top-hung system) and 240 kg (Garage+/Décor+). Avoid overloading individual storage components and distribute the weight evenly across the system. Different products have different recommended maximum load capacities. For more information, please refer to the Product Information section for each product, as well as Measure & Plan. Before installation, check the wall material and condition. Elfa's product range is generally designed for normal use in residential indoor environments.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Specification

Technical description

Planning rules

Safety and care

Assembly Instructions

Configured price

Select size

Specification

Technical description

Planning rules

Safety and care

Assembly Instructions