Extension standard

Specification

<

Specification

Extend the height of your storage with the Décor+ extension standard. This makes it possible to create a solution with a maximum height of 3324 mm. Seamlessly attach it to a standard.

Product LineDécor+

Article number

440950

ColorMatte white

Width (mm)25

Depth (mm)27

Height1148

Technical description

<

Technical description

Special hang standard intended to fit below a hang standard, in order to join two standards. Combine with extension hang standard adapter.

Makes it possible to create 3324 mm (130-7/8”) high solutions:
Hang Standard 2172 mm (85-4/8”) + Extension hang standard adapter distance 4 mm (1/8”) + Extension hang standard 1148mm (45-2/8”)

Extension standards can be cut to size, in order to adapt them to the desired height. When adjusting the combined standards height, cut the extension standard.

Extension hang standards are made of high quality, epoxy-bonded steel. They have have two rows of slots, spaced 32 mm apart.

2 unique metal colours:
Matte White (polyester colour) NCS S 0300-N, fine texture, gloss 5
Matte Grey (polyester colour) NCS S 7500-N, fine texture, gloss 5

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will automatically add extension standard and extension standard adapter, when you are planning solution heights surpassing 2172 mm. The Elfa Planner will also take into account which slots that are unavailable to mount products in, where the the two standards join, since the extension hang standard adapter prevents those slots to be used.

It is not possible to have multiple extension standards.

The extension standard can be cut, as long as there are 4 slots from the top remaining on the extension hang standard. Always make the cut from the bottom of the extension hang standard.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: Screwdriver, ladder/stool and metal saw (if cutting extension hang standard).

Before you start: If the extension standard needs to be cut, start by doing this.

Step 1: Start by hanging the standard on the top track. Note that an extension standard can not be mounted on a top track - only onto a standard (using an extension standard adapter). Separate out the screws from the extension hang standard adapter. Bend out the hang standard slightly from the wall and slide the top part of the extension standard adapter into the standard from underneath.

Step 2: Fasten the adapter with one of the screws by using a screwdriver.

Step 3: Slide the small, colour-matching, plastic piece and the extension standard onto the adapter.

Step 4: Fasten with the remaining screw .

Note: When fastening the standards to the wall with screws, do this after all functions in the system are mounted, to ensure the correct position of the standards. When combining a standard with an extension standard and an extension standard adapter; only the middle screw hole in the standard can be used to fasten the standard into the wall (the bottom one is used for the adapter).

Assembly Instructions

Extension Standard 1148 mm Matte white

19,70

Needs To Have

Extension standard adapter Matte grey/Matte white

Nice To Have

Standard 1020 mm Matte white

Standard 1532 mm Matte white

Standard cover 1100 mm Matte white

Standard 2172 mm Matte white

Lighting cable box W: 60 Matte white