Bracket | Elfa

Specification

<

Specification

Elevate your storage solutions with our versatile Garage+ bracket, engineered for strong and stable installation on standards. Easily assembled in standard slots, it offers flexibility to rearrange your storage system as needed. The bracket features cut-outs for closet rod holder, making it a versatile addition. Pair with wire shelves and gliding drawers for a complete and finished look.

Product LineGarage+

Article number

4100097

ColorMatte grey

Width (mm)13

Depth (mm)333

Height55

Weight Recommendation40 kg

Technical description

<

Technical description

The bracket is the component that holds many products in the Garage+ system. Two products with the same/corresponding depth can share one bracket.

Brackets are made of high quality/strength steel, providing a strong and stable construction with a great load capacity. They are easy to assemble and re-assemble in the hang standard slots, when you need to change position in the system.

When only one product is assembled in the bracket, the other side of the bracket can be covered by a bracket cover.

The bracket features a cut-out underneath, intended for attaching a closet rod holder.

Colour:
Matte Grey (polyester colour) NCS S 7500-N, fine texture, gloss 5

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will calculate the right amount of brackets.

Maximum load per section is 240 kg. Do not store too much on each interior product and distribute the weight evenly across the system. Ensure the material and condition of the wall.

A bracket (or other product mounted into the standard) can not be placed in the lowest 2 hang standard slots, since the load capacity is weaker there.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

QR-code Garage+

Before you start: Mount the hang standards into the top track.

Tip: Before mounting the brackets, group the hang standards next to eachother and place out the brackets. This in order to quickly see that the brackets are placed in corresponding slots.

Assemble the brackets into the hang standard by leaning the "nose" (A) of the bracket upwards and attaching the upper "teeth" (B) of the backside of the bracket into the slots. Then let the bracket come down.

Assembly Instructions