Universal runners

Specification

<

Specification

Upgrade your existing cabinets, such as melamine closets, with our runner - designed to add in mesh- or wire drawers. The runner is aimed at cabinet spaces with pre-drilled hole sides with dimensions width: 355-570 mm and depth: 550 mm.

Product LineClassic by Elfa

Article number

225214

ColorWhite

Width (mm)11

Depth (mm)550

Height11

Technical description

<

Technical description

Runners to make it possible to place mesh- or wire drawers in existing standard wardrobes. Suitable for spaces with 355-370, 455-470 och 555-570 mm width and 450-550 mm depth.

Screws are included: Torx 6,3x16 mm.

Metal colour:
White, close to NCS S 0300-N, gloss around 85
Note: as the finish is a mixed powder, the NCS code/gloss isn’t exact.

Planning rules

<

Planning rules

Choose the following width of mesh- or wire drawer depending on the inner width of the wardrobe:
355-370 mm = W:35
455-470 mm = W:45
555-570 mm = W:55

The maximum depth of the wardrobe = 550 mm.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: screwdriver.

Before you start: measure the inside of the wardrobe and then check the back of the header card on the packaging in order to see the amount of shims needed to adjust for the width.

The package includes two runners (left and right), two sets of plastic holders (to attach the runners), screws (to attach the plastic holders) and x4 shims.

Step 1: Attach the needed amount of shim pieces onto the back of the plastic holders.

Step 2: Screw the plastic holders (with eventual shims on) into the pre-drilled holes in the wardrobe sides.

Step 3: Mount the runners in to the plastic holders.

Step 4: Finally, slide in the drawer.

Assembly Instructions