Hang standard 1532 mm white

You need the following to assemble: Screwdriver, ladder/stool and metal saw (if cutting hang standard or extension hang standard if needed).

Important NOTE: If you are going to combine hang standard and extension hang standard, do not cut hang standard. Only cut Extension hang standard (from the bottom).

Step 1: Hang in the hang standards onto the bottom ""lip"" of the top track. In order to fit in the hang standards into the top track, aim for an entry point where there is a cut-out on the upper lip of the top track.

Step 2: Once you have hung in all hang standards, group them together and mount the brackets click-in at the chosen positions. This is a useful tip in order to get the brackets aligned.

Step 3: Slide the hang standards to their approximate position on the top track. With the end stop at the outer edges of the top track, the hang standard can be placed at the far end of the track.

Tip: If you have top track covers chosen for your solution - now is a good time to click these onto the top track, to get the right spacing between the hang standards.

Step 4 (optional): If you want to fasten the hang standards to the wall with a screw, do it after all functions in the system are mounted, to ensure the correct position of the standards. It is not necessary to fasten the hang standard to the wall, the system will stay in place once loaded. It is an optional measurement in order to tighten the system better to the wall.  Only use one screw hole on the hang standard, there is no need to use all of them when securing them to the wall.

When combining a standard with an extension standard and adapter; only the middle screw hole can be used to be screwed into the wall (the bottom one is used for the adapter).