Weight and safety

See recommended weight per product.

DEBUG: [Weight and safety]

PRODUCT TYPES SECTION WIDTH
  45 60 90
Max. recommended weight spread evenly across the system
SHELVES (ALL DEPTHS)
Wire shelf 40 kg 40 kg 30 kg
Wire shelf basket 40 kg 40 kg 40 kg
Click-in melamine shelf 40 kg 40 kg  
Melamine shelf 40 kg 30 kg 20 kg
Angled shelf metal   22 kg  
Shelf/Tray depth 115 mm   16 kg  
Shelf/Tray depth 267 mm   22 kg  
Drying shelf   20 kg 20 kg
EXTENDABLE PRODUCTS (ALL DEPTH)
All extendable functions 8 kg 8 kg  
VALET ROD
Closet rod 22.5 kg 30 kg 45 kg
Expandable valet rod 7 kg 7 kg 7 kg
BRACKET HOOK RACK (ALL DEPTH)
All console hook strips 4 kg 4 kg 4 kg
HOOKS
All pegboard hooks 2.3 kg
Storage track accessory hooks 3 kg
Shelf hook 3 kg

DEBUG: []

Top track, standard and bracket from Classic by Elfa.

Safety margins for top tracks and standards

The carrier strip can be mounted directly against the roof strip, use a spirit level to make it straight. If you are installing a cover strip, the carrier strip must be installed 3-5 mm from the ceiling. Always keep the end stops on the carrier rail at the outer edges of the solution when mounting the storage unit. If you want the system to be even more stable, the hanging rails can be fixed in the right position, with a screw in the wall after installing the entire solution. Note: One screw per suspension rail is sufficient!

The recommendations assume that the system is mounted on a wall without defects. You are responsible for ensuring that the wall is in good enough condition to withstand the weight of the items you want to store. The recommendations assume that the solution is mounted with an attachment suitable for the material in the wall. The recommendations assume that you have followed the assembly instructions.

Classic by Elfa wardrobe in white with beige arrows that say “200 kg”.

Weight and safety

A top-hanging click-in system is built in sections. A section is the surface between two standards. The maximum load per section is 200 kg. Do not store too much on each interior product and distribute the weight evenly across the system.

Ensure wall material and condition. The recommendations assume that the system is mounted on a wall without defects. You are responsible for ensuring that the wall is in good enough condition to withstand the weight of the items you want to store.