Bracket click-in

Specification

<

Specification

Create a stable base for your storage solutions with our versatile and strong bracket, desgined for a stable installation in standards. Assembly is easy into the standard and you also have the versatility to re-arrange your system with changing storage needs. The bracket has a cut-out underneath aimed for a closet rod holder, ensuring additional clothing storage. Combine with wire shelves and gliding functions in corresponding depth, for a complete and finished look.

Product LineClassic by Elfa

Article number

414225

ColorGraphite

Width (mm)13

Depth (mm)434

Height52

Weight Recommendation40 kg

Technical description

<

Technical description

The bracket is the component that holds almost all products in the click-in system. Two products with the same/corresponding depth can share one bracket. Brackets are made of high quality/strength steel, providing a strong and stable construction with a great load capacity. They are easy to assemble and re-assemble in the hang standard slots, when you need to change position in the system. When only one product is assembled in the bracket, the other side of the bracket can be covered by a bracket cover. The bracket features a cut-out underneath, intended for attaching a closet rod holder.

2 metal colours:
White, close to NCS S 0300-N, gloss around 85
“Graphite”, a unique finish close to NCS S 8000-N, gloss around 50
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will calculate the right amount of brackets. Maximum load per section is 200 kg. Do not store too much on each interior product and distribute the weight evenly across the system. Ensure the material and condition of the wall. A bracket (or other product mounted into the standard) can not be placed in the lowest 2 hang standard slots, since the load capacity is weaker there.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Assembly instruction: Bracket click-in

Before you start: Mount the hang standards into the top track.

Tip: Before mounting the brackets, group the hang standards next to eachother and place out the brackets. This in order to quickly see that the brackets are placed in corresponding slots.

Assemble the brackets into the hang standard by leaning the ""nose"" (A) of the bracket upwards and attaching the upper ""teeth"" (B) of the backside of the bracket into the slots. Then let the bracket come down.

Assembly Instructions