Wire shelf | Elfa

Specification

<

Specification

Enjoy a clear view of your stored items with our wire shelf - a versatile solution offering excellent ventilation and transparency. This shelf effortlessly clicks into place between two brackets, requiring no tools for installation. Use D: 30 for narrower spaces like hallways and shallow pantry storage, use D: 40 and 50 for linen closets or standard closet storage. Can be cut in width to suit your needs.

Product LineClassic by Elfa

Article number

451525

ColorGraphite

Width (mm)902

Depth (mm)405

Height14

Weight Recommendation30 kg

Technical description

<

Technical description

The wire shelf is a shelving option providing good ventilation and transparency for good overview. It easily clicks into place between two bracket click-in, with no tools needed.

Wire shelves are made of steel wire. The double wire at the front and back adds strength without limiting accessibility. Thanks to the wire design, less dust gathers on the shelves, compared to a typical wooden shelf.

The shelf can be cut to desired width, to achieve a tailored width of your solution.

Wire shelves click in place between two brackets in the corresponding depth. Other products such as shelf hook can be mounded under a wire shelf. The shelf can also be divided into sections with a wire shelf divider. The wire shelf can, in terms of width, be cut to size using a metal saw or angle grinder.

2 metal colours:
White, close to NCS S 0300-N, gloss around 85
“Graphite”, a unique finish close to NCS S 8000-N, gloss around 50
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will calculate the right amount of wire shelves. The design tool, will also help you configure the right widths in the solution, for example when planning a section that is not a standard section width.

Wire shelves in click-in system:
* Two wire shelves can share the same bracket. Ideal if you like clean, straight lines or want continuous shelving over multiple sections.
* D:30 shelves are perfect for narrow storage areas, such as hallways. D:40 and D:50 can be used at the top of solutions to store luggage, large storage boxes and bulky items.
* When planning your solution, bear in mind that an even spread of stored items across the shelves is preferable, evenly loading the entire solution. Do not place all of the weight on the bottom shelves. Plan for placing hang standards closer (W:45-W:60) together when you aim for heavier loads.

Wire shelves between drawer system units:
* For drawer system units with standard depth, wire shelves are available in D:30, 40 and 50. Wire shelves can be placed between two drawer system units and are to be secured with clips attached to the side runners. The maximum width of such a wire shelf is W:90.
* For drawer system units mini, wire shelves are only available in D:30. Wire shelves can be placed between two drawer system units and are to be secured with clips attached to the side runners.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Assembly instruction: Wire shelf

You need the following to assemble: metal saw (if you need to cut the wire shelf).

Before you start: Mount the brackets. If needed, cut the wire shelf to the desired width.

A wire shelf has a top and a bottom. The middle support wire (A) is connected to the bottom of the shelf.

Step 1: Place the bottom of the wire shelf over the notches in the click-in bracket.

Step 2: Install the wire shelf with end wires inside the brackets. Lock the shelf into place by pressing down on the middle of the shelf and pushing toward the wall.

To reposition a wire shelf after it’s been attached to the brackets: hold by the brackets, and lift the front of the shelf toward the ceiling and outward to release the entire unit from the hang standards.

Demount: To remove a wire shelf from a bracket while on the hang standards: hold the hang standard steady with one hand. Place the other hand at the back of the shelf. Pull up and forward to release.

Tip: If you have gliding drawer frames, gliding shoe shelf or an angled shelf in your solution, assemble these before installing the wire shelves. This to ensure that the CC measurement is correct - making the installation of the wire shelves easier.

Assembly Instructions