Bracket with closet rod holder

Specification

<

Specification

Elevate your shelving with our sturdy epoxy-bonded steel bracket. The bracket is designed for use with solid shelves and features an integrated closet rod holder at the front of the bracket. Simply hook the bracket into a wallband and then secure the shelf with shelf pins, bracket screws or a shelf joiner. Add a closet rod in the designated holder.

Product LineSparring by Elfa

Article number

413010

ColorWhite

Width (mm)13

Depth (mm)320

Height55

Weight Recommendation60 kg

Technical description

<

Technical description

Bracket to hold solid shelves with the integrated possibility to add a closet rod in the front. Hooks into Wallband. To be used with solid shelf with 300 mm depth.

Shelf is secured with shelf pins, bracket screws or shelf joiner. Supplement with closet rod.

2 metal colours:
White, close to NCS S 0300-N, gloss around 85
“Graphite”, a unique finish close to NCS S 8000-N, gloss around 50
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will guide you where a bracket for solid shelf can be placed and automatically add the correct melamine shelf. The Elfa Planner will also guide you to which width the melamine shelf should be cut.

We recommend the following maximum loads based on the following section widths (CC measurement in cm between wallbands):

CC 450 mm: 40 kg
CC 600 mm: 30 kg
CC: 900 mm: 20 kg

The maximum recommended width between two bracket for solid shelf is 900 mm.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Before you start: Mount the wallbands.

Assemble the bracket into the wallband by leaning the "nose" of the bracket upwards and attaching the upper "teeth" of the backside of the bracket into the slots. Then let the bracket come down.

The holder on the front of the bracket can then be used for mounting a closet rod.

Assembly Instructions