Standard 2172 mm Matte grey

The hang standard is the system component that holds the system products, for example brackets in order to install shelves, drawers and other storage features. 

Hang standards are easy to mount and adjust - hang the standard on the top track and move to the wanted position. The weight of a loaded system pulls the hang standards down securely onto the top track, and presses them back against the supporting wall, increasing stability and durability at the same time.

Hang standards are made of high quality, epoxy-bonded steel. They have have two rows of slots, spaced 32 mm apart.
 
They can be cut to size, in order to adapt them to the desired height. Note: a minimum of 4 pair of slots from the top must remain after cutting.

Hang standards should, in addition to being placed in the top track, also be attached to the wall using the screw holes in the standard, in order to further reinforce the attachment and/or provide a more sturdy solution. Secure the standard to the wall using all screw holes, except for the top one.

Colour:
Matte Grey (polyester colour) NCS S 7500-N, fine texture, gloss 5

As our system offers creativity and flexibility in how you plan a solution, we recommend using our planning tool on elfa.com. When planning in Elfa Planner, the design tool will calculate the right amount and spacing of the standards. The design tool will also help you in terms of altering the heights of the standards.

Standards can be cut to size, the minimum cut height is when 4 pairs of slots remain from the top.

Maximum load per section is 240 kg. Do not store too much on each interior product and distribute the weight evenly across the system. Ensure the material and condition of the wall.

Note: with heavier loads it is important to follow our recommendation regarding a safe installation of the standards. Secure the standard to the wall using all screw holes, except for the top one. Also, note that no product can be placed in the lowest pair of slots in the standard (except for extension standard adapter).

A bracket (or other product mounted into the standard) can not be placed in the lowest pair of standard slots, since the load capacity is weaker there (except for extension standard adapter).

Assembly Instructions