Weight and safety

See recommended weight per product.

PRODUCT TYPES	SECTION WIDTH
	45	60	90
Max. recommended weight spread evenly across the system
SHELVES (ALL DEPTHS)
Wire shelf	40 kg	40 kg	30 kg
Wire shelf basket	40 kg	40 kg	40 kg
Click-in melamine shelf	40 kg	40 kg
Melamine shelf	40 kg	30 kg	20 kg
Angled shelf metal		22 kg
Shelf/Tray depth 115 mm		16 kg
Shelf/Tray depth 267 mm		22 kg
Drying shelf		20 kg	20 kg
EXTENDABLE PRODUCTS (ALL DEPTH)
All extendable functions	8 kg	8 kg
VALET ROD
Closet rod	22.5 kg	30 kg	45 kg
Expandable valet rod	7 kg	7 kg	7 kg
BRACKET HOOK RACK (ALL DEPTH)
All console hook strips	4 kg	4 kg	4 kg
HOOKS
All pegboard hooks	2.3 kg
Storage track accessory hooks	3 kg
Shelf hook	3 kg

Top track, standard and bracket from Classic by Elfa.

Safety margins for top tracks and standards

The carrier strip can be mounted directly against the roof strip, use a spirit level to make it straight. If you are installing a cover strip, the carrier strip must be installed 3-5 mm from the ceiling. Always keep the end stops on the carrier rail at the outer edges of the solution when mounting the storage unit. If you want the system to be even more stable, the hanging rails can be fixed in the right position, with a screw in the wall after installing the entire solution. Note: One screw per suspension rail is sufficient!

The recommendations assume that the system is mounted on a wall without defects. You are responsible for ensuring that the wall is in good enough condition to withstand the weight of the items you want to store. The recommendations assume that the solution is mounted with an attachment suitable for the material in the wall. The recommendations assume that you have followed the assembly instructions.

Classic by Elfa wardrobe in white with beige arrows that say “200 kg”.

Weight and safety

A top-hanging click-in system is built in sections. A section is the surface between two standards. The maximum load per section is 200 kg. Do not store too much on each interior product and distribute the weight evenly across the system.

Ensure wall material and condition. The recommendations assume that the system is mounted on a wall without defects. You are responsible for ensuring that the wall is in good enough condition to withstand the weight of the items you want to store.

Planeringsguide Interiör

Mät och planera

Use our drawing tool

Drag and drop to plan your storage solution.

Start planning

Book a meeting

Get help from our experts and find the right solution for your specific needs.

Book a meeting