Elevate your closet organization with the versatile Décor+ closet rod holder. Designed to fit seamlessly beneath the bracket, Enhance flexibility by joining two closet rods within the same holder. Achieve an organized closet effortlessly, optimizing hanging space while maintaining a clean and tidy appearance.

Holder for closet rod, to be attached underneath a bracket. Two closet rods can be joined in one holder. Closet Rod holder is made from painted steel in matching colour. Closet Rod Holders are to be attached to the bracket through an integrated slot beneath the Garage+/Décor+ bracket and can be used in all depths of brackets. Two closet rods can share one closet rod holder. Not able to use in the same Bracket as Gliding Frame. Height between top of bracket to bottom of the closet rod holder: D: 30 / 12"/12” = 85 mm / 3-3/8” D: 40 / 16"/16” = 92 mm / 3-5/8” D: 52 / 20” = 97 mm / 3-7/8" The height between underside of bracket and top of closet rod: 34 mm/1-3/8" regardless of bracket depth. 2 unique metal colours: Matte White (polyester colour) NCS S 0300-N, fine texture, gloss 5 Matte Grey (polyester colour) NCS S 7500-N, fine texture, gloss 5

When planning in Elfa Planner, the design tool will automatically add closet rod holders when planning a closet rod. The depth of hangers has been taken into account when the position of the closet rod holder slot in the click-in brackets was set. * If you are planning a solution with sliding doors, be sure to leave sufficient space between the interior and the sliding doors, to have space for the hanging clothes. In a system based on D: 40 / 16", we recommend at least 550 mm (21-21/32") measured from the back wall to the sliding doors. * Two closet rods can join in one closet rod holder. * Closet rod holder can not be mounted in the same bracket as a gliding frame. The space between the underside of bracket and closet rod topside is 34 mm (1-11/32").

Assembly Instructions