Shelf pins | Elfa

Specification

<

Specification

Keep your solid shelves securely in place with our shelf pins. The pins are easily hammered into the underside of a solid shelf and are then placed into a bracket for solid shelf, providing reliable and stable support. Come in a 10-pack.

Product LineSparring by Elfa

Article number

470316

ColorWhite

Width (mm)8

Depth (mm)8

Height20

Technical description

<

Technical description

Pin to be hammered into place on the underside of a solid shelf and to be placed in bracket for solid shelf. Holds the shelf in position. Come in a 10-pack.

The package includes:
* 10 plastic plugs
* 10 nails

Planning rules

<

Planning rules

A set of shelf pins has 10 units (nail and plug). Since each shelf should be attached back and front in both brackets, the set is sufficient to mount 2,5 shelves.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following top assemble: Hammer, thin pencil.

Before you start: Mount the wallbands and brackets. Place the solid shelf onto the brackets in the intended position. Using a small/thin pencil, mark where to attach the shelf pins to the shelf through the screwholes in the bracket.

Step 1: Place the solid shelf upside-down on a non-sentivive surface and hammer in the shelf pins, by placing the plastic plugs over the marked positions and hammering the nail through the plastic plug into the shelf.

Step 2: Turn the shelf around and place it into the brackets.

Assembly Instructions