Shelf joiners

Specification

<

Specification

Connect your melamine shelves easily with our shelf joiners. The shelf joiners link same-depth solid shelves onto the same bracket, securing a stable connection between the shelves and making them stay in place. Screws are included. Come in a 6-pack.

Product LineSparring by Elfa

Article number

470216

ColorWhite

Width (mm)41

Depth (mm)15

Height23

Technical description

<

Technical description

Shelf joiners, used to connect two melamine shelves in the same depth on one bracket for solid shelf. Screws are included. Come in a 6-pack.

Made from epoxy-bonded steel.

2 metal colours:
White, close to NCS S 0300-N, gloss around 85
“Graphite”, a unique finish close to NCS S 8000-N, gloss around 50
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will automatically add shelf joiners in the case where two melamine shelves in the corresponding depth meet and share the same bracket.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Before you start: Mount the wallbands and brackets.

Step 1: Place the two melamine shelves next to eachother , upside-down, on a flat surface and secure that they are perfectly flush.

Step 2: Place the shelf joiners onto the shelves, back and front, with one bore hole on each shelf. Be sure to have the shelf joiners perfectly centered, so that the U-shaped part is straight above where the shelves meet.

Step 3: Carefully attach the shelf joiners with the screws.

Step 4: Turn the joined shelves with the right side up and lower the joint part (with the U-shaped part of the shelf joiners) into the bracket.

Step 5: Fasten the rest of the shelves into the other brackets using bracket screws.

Tip: In order to avoid cracks in the shelf, it might be a good idea to pre-drill the shelf with a slightly smaller dimension in the bore hole, before attaching the screws.

Assembly Instructions