<

Specification

Enhance your closet organization with our closet rod holder. Easily attach it underneath bracket click-ins to fasten the closet rod. The holder allows for joining two closet rods in the holder for increased flexibility. Recommended maximum distance of 900 mm between two closet rod holders.
Product LineClassic by Elfa
Article number
470910
ColorWhite
Width (mm)35
Depth (mm)43
Height77
<

Technical description

Holder for closet rod, to be attached underneath a bracket click-in. Two closet rods can be joined in one holder. 2 metal colours: White, close to NCS S 0300-N, gloss around 85 “Graphite”, a unique finish close to NCS S 8000-N, gloss around 50 Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.
<

Planning rules

When planning in Elfa Planner, the design tool will automatically add closet rod holders when planning a closet rod. The depth of hangers has been taken into account when the position of the closet rod holder slot in the click-in brackets was set. * If you are planning a solution with sliding doors, be sure to leave sufficient space between the interior and the sliding doors, to have space for the hanging clothes. In a system based on D:40, we recommend at least 550 mm measured from the back wall to the sliding doors. * Two closet rods can join in one closet rod holder. * Do not use a closet rod of more than 905 mm width (W:90) without adding a supporting closet rod holder in the center.
<
Warranty & Quality
The daily use of Elfa storage solutions requires both materials and craftsmanship of the highest quality. We develop products designed to last, and our 10-year warranty is a promise of exactly that.
Elfa products are covered by a 10-year warranty from the date of purchase.




What is covered by the warranty?
The warranty covers defects in materials and workmanship under normal residential use. It also covers functional defects in moving components such as wheels, soft-close mechanisms, and pull-out functions.
This commercial warranty does not affect your statutory rights under applicable consumer protection legislation.




Warranty Provider
The warranty provider is Elfa International AB, Sweden.




How to make a claim
If there is an issue with your product, contact the retailer/store where you made your purchase and bring your receipt. The store will then inform Elfa. We at Elfa will do everything we can to provide a response to your claim as quickly as possible. However, it is important that you report any defect promptly, and therefore we recommend that you unpack and inspect your delivery immediately.
If you cannot bring the product to the store, please take a photo showing the defect. Take one photo from approximately 1 metre away and one close-up photo with a nearby object (for example, a matchbox or pen) for size comparison in the case of surface damage.




How we help you
In the event of an approved claim, Elfa undertakes, at no cost to you as a consumer, to repair or replace the defective product or component.
Repair or replacement of individual parts is prioritised in order to extend the product's lifespan. If this is not possible, the product will be replaced with a new or equivalent item.




Limitations
Naturally, we expect that you take good care of your Elfa products. A product that has been stored, assembled, or used incorrectly is not covered by the warranty. External damage and consequential damage occurring after your delivery has been accepted are not covered by the warranty.
<

Assembly Instructions

Assembly Instructions
Garderob Stånghållare Vit Closetrod ClosedHolder, vit Garderob Stånghållare Grafit Closetrod Closetrodhållare Grafit
Classic by Elfa

Closet rod holder white

Recommended price (Prices may vary between retailers)

3,00

Enhance your closet organization with our closet rod holder. Easily attach it underneath bracket click-ins to fasten the closet rod. The holder allows for joining two closet rods in the holder for increased flexibility. Recommended maximum distance of 900 mm between two closet rod holders.

  • Easy Installation underneath bracket click-in.
  • Durable epoxy-bonded steel construction.
  • Allows you to join two closet rods within a single holder.

Color

Size

<

Specification

Enhance your closet organization with our closet rod holder. Easily attach it underneath bracket click-ins to fasten the closet rod. The holder allows for joining two closet rods in the holder for increased flexibility. Recommended maximum distance of 900 mm between two closet rod holders.
Product LineClassic by Elfa
Article number
470910
ColorWhite
Width (mm)35
Depth (mm)43
Height77
<

Technical description

Holder for closet rod, to be attached underneath a bracket click-in. Two closet rods can be joined in one holder. 2 metal colours: White, close to NCS S 0300-N, gloss around 85 “Graphite”, a unique finish close to NCS S 8000-N, gloss around 50 Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.
<

Planning rules

When planning in Elfa Planner, the design tool will automatically add closet rod holders when planning a closet rod. The depth of hangers has been taken into account when the position of the closet rod holder slot in the click-in brackets was set. * If you are planning a solution with sliding doors, be sure to leave sufficient space between the interior and the sliding doors, to have space for the hanging clothes. In a system based on D:40, we recommend at least 550 mm measured from the back wall to the sliding doors. * Two closet rods can join in one closet rod holder. * Do not use a closet rod of more than 905 mm width (W:90) without adding a supporting closet rod holder in the center.
<
Warranty & Quality
The daily use of Elfa storage solutions requires both materials and craftsmanship of the highest quality. We develop products designed to last, and our 10-year warranty is a promise of exactly that.
Elfa products are covered by a 10-year warranty from the date of purchase.




What is covered by the warranty?
The warranty covers defects in materials and workmanship under normal residential use. It also covers functional defects in moving components such as wheels, soft-close mechanisms, and pull-out functions.
This commercial warranty does not affect your statutory rights under applicable consumer protection legislation.




Warranty Provider
The warranty provider is Elfa International AB, Sweden.




How to make a claim
If there is an issue with your product, contact the retailer/store where you made your purchase and bring your receipt. The store will then inform Elfa. We at Elfa will do everything we can to provide a response to your claim as quickly as possible. However, it is important that you report any defect promptly, and therefore we recommend that you unpack and inspect your delivery immediately.
If you cannot bring the product to the store, please take a photo showing the defect. Take one photo from approximately 1 metre away and one close-up photo with a nearby object (for example, a matchbox or pen) for size comparison in the case of surface damage.




How we help you
In the event of an approved claim, Elfa undertakes, at no cost to you as a consumer, to repair or replace the defective product or component.
Repair or replacement of individual parts is prioritised in order to extend the product's lifespan. If this is not possible, the product will be replaced with a new or equivalent item.




Limitations
Naturally, we expect that you take good care of your Elfa products. A product that has been stored, assembled, or used incorrectly is not covered by the warranty. External damage and consequential damage occurring after your delivery has been accepted are not covered by the warranty.
<

Assembly Instructions

Assembly Instructions

Nice To Have