<

Specification

Elevate your closet organization with the Garage+ closet rod, crafted from pre-painted steel that matches seamlessly. Hang your clothes for a wrinkle-free and organized look, creating an efficient overview and easy access. Mount effortlessly into a closet rod holder and customize the width by cutting. Complete the setup with closet rod end caps for a polished finish.
Product LineGarage+
Article number
621951
ColorMatte grey
Width (mm)625
Depth (mm)15
Height27
Weight Recommendation30 kg
<

Technical description

Rod for hanging clothes, creating a good overview and easy access. Supplement with closet rod holder. Can be cut to desired widths. Add closet rod end caps to both ends for the finishing touch.
The closet rod is made from pre-painted steel.
Closet rod to be attached to closet rod holders and the ends covered with end caps in poly propylene-plastic.
Closet Rods can be made to measure and cut with a saw.
Colour:
Matte Grey (polyester colour) NCS S 7500-N, fine texture, gloss 5
<

Planning rules

When planning in Elfa Planner, the design tool has a choice where you can choose a solution with wire shelf with a closet rod underneath. The tool will automatically add closet rod holders when planning such a solution.
* Do not use a closet rod of more than 905 mm width (W: 90 / 3') without adding a supporting closet rod holder in the center.
* If you are planning a solution with sliding doors, be sure to leave sufficient space between the interior and the sliding doors, to have space for the hanging clothes. In a system based on D: 40 / 16", we recommend at least 550 mm (21-5/8") measured from the back wall to the sliding doors.
Choose as long of a closet rod as possible.
When joining closet rods, each closet rod will need to be cut down by 10 mm (3/8”).
If a closet rod is positioned in a mid section, it needs to be cut down by 18 mm (6/8”) to be able to be joined inside the closet rod holders.
Note: if the outer Closet Rods aren't  cut, there will be an outstick, unless rods are cut 10 mm (3/8”).
<
Warranty & Quality
The daily use of Elfa storage solutions requires both materials and craftsmanship of the highest quality. We develop products designed to last, and our 10-year warranty is a promise of exactly that.
Elfa products are covered by a 10-year warranty from the date of purchase.




What is covered by the warranty?
The warranty covers defects in materials and workmanship under normal residential use. It also covers functional defects in moving components such as wheels, soft-close mechanisms, and pull-out functions.
This commercial warranty does not affect your statutory rights under applicable consumer protection legislation.




Warranty Provider
The warranty provider is Elfa International AB, Sweden.




How to make a claim
If there is an issue with your product, contact the retailer/store where you made your purchase and bring your receipt. The store will then inform Elfa. We at Elfa will do everything we can to provide a response to your claim as quickly as possible. However, it is important that you report any defect promptly, and therefore we recommend that you unpack and inspect your delivery immediately.
If you cannot bring the product to the store, please take a photo showing the defect. Take one photo from approximately 1 metre away and one close-up photo with a nearby object (for example, a matchbox or pen) for size comparison in the case of surface damage.




How we help you
In the event of an approved claim, Elfa undertakes, at no cost to you as a consumer, to repair or replace the defective product or component.
Repair or replacement of individual parts is prioritised in order to extend the product's lifespan. If this is not possible, the product will be replaced with a new or equivalent item.




Limitations
Naturally, we expect that you take good care of your Elfa products. A product that has been stored, assembled, or used incorrectly is not covered by the warranty. External damage and consequential damage occurring after your delivery has been accepted are not covered by the warranty.
<

Assembly Instructions

Assembly Instructions
Garderobsstångens ändlock mattgrå Garderob Rod Matt Grå Garage ENV
Garage+

Closet rod 625 mm Matte grey

Recommended price (Prices may vary between retailers)

11,60

Elevate your closet organization with the Garage+ closet rod, crafted from pre-painted steel that matches seamlessly. Hang your clothes for a wrinkle-free and organized look, creating an efficient overview and easy access. Mount effortlessly into a closet rod holder and customize the width by cutting. Complete the setup with closet rod end caps for a polished finish.

  • Provides an efficient overview and easy access to your clothing., Matching matte color for a uniform look., Easily cut to desired widths for a tailored closet setup.

Color

Size

<

Specification

Elevate your closet organization with the Garage+ closet rod, crafted from pre-painted steel that matches seamlessly. Hang your clothes for a wrinkle-free and organized look, creating an efficient overview and easy access. Mount effortlessly into a closet rod holder and customize the width by cutting. Complete the setup with closet rod end caps for a polished finish.
Product LineGarage+
Article number
621951
ColorMatte grey
Width (mm)625
Depth (mm)15
Height27
Weight Recommendation30 kg
<

Technical description

Rod for hanging clothes, creating a good overview and easy access. Supplement with closet rod holder. Can be cut to desired widths. Add closet rod end caps to both ends for the finishing touch.
The closet rod is made from pre-painted steel.
Closet rod to be attached to closet rod holders and the ends covered with end caps in poly propylene-plastic.
Closet Rods can be made to measure and cut with a saw.
Colour:
Matte Grey (polyester colour) NCS S 7500-N, fine texture, gloss 5
<

Planning rules

When planning in Elfa Planner, the design tool has a choice where you can choose a solution with wire shelf with a closet rod underneath. The tool will automatically add closet rod holders when planning such a solution.
* Do not use a closet rod of more than 905 mm width (W: 90 / 3') without adding a supporting closet rod holder in the center.
* If you are planning a solution with sliding doors, be sure to leave sufficient space between the interior and the sliding doors, to have space for the hanging clothes. In a system based on D: 40 / 16", we recommend at least 550 mm (21-5/8") measured from the back wall to the sliding doors.
Choose as long of a closet rod as possible.
When joining closet rods, each closet rod will need to be cut down by 10 mm (3/8”).
If a closet rod is positioned in a mid section, it needs to be cut down by 18 mm (6/8”) to be able to be joined inside the closet rod holders.
Note: if the outer Closet Rods aren't  cut, there will be an outstick, unless rods are cut 10 mm (3/8”).
<
Warranty & Quality
The daily use of Elfa storage solutions requires both materials and craftsmanship of the highest quality. We develop products designed to last, and our 10-year warranty is a promise of exactly that.
Elfa products are covered by a 10-year warranty from the date of purchase.




What is covered by the warranty?
The warranty covers defects in materials and workmanship under normal residential use. It also covers functional defects in moving components such as wheels, soft-close mechanisms, and pull-out functions.
This commercial warranty does not affect your statutory rights under applicable consumer protection legislation.




Warranty Provider
The warranty provider is Elfa International AB, Sweden.




How to make a claim
If there is an issue with your product, contact the retailer/store where you made your purchase and bring your receipt. The store will then inform Elfa. We at Elfa will do everything we can to provide a response to your claim as quickly as possible. However, it is important that you report any defect promptly, and therefore we recommend that you unpack and inspect your delivery immediately.
If you cannot bring the product to the store, please take a photo showing the defect. Take one photo from approximately 1 metre away and one close-up photo with a nearby object (for example, a matchbox or pen) for size comparison in the case of surface damage.




How we help you
In the event of an approved claim, Elfa undertakes, at no cost to you as a consumer, to repair or replace the defective product or component.
Repair or replacement of individual parts is prioritised in order to extend the product's lifespan. If this is not possible, the product will be replaced with a new or equivalent item.




Limitations
Naturally, we expect that you take good care of your Elfa products. A product that has been stored, assembled, or used incorrectly is not covered by the warranty. External damage and consequential damage occurring after your delivery has been accepted are not covered by the warranty.
<

Assembly Instructions

Assembly Instructions

Nice To Have