Before you start: Mount the hang standards and brackets. Assembly of gliding frame and trim: Step 1: Position the gliding frame over the brackets with the tabs on the side of the frame over the notches in the bracket. Ensure that the locking tabs are in the right position. The tabs should be pointing towards the wall. Push down so that the tabs are completely down into the bracket notches (until you hear a click). Then push the frame back towards the wall, until you hear a click. Step 2: Identify which of the slide covers is left/right. The outside of the cover is the flat side and the thinner part of the "triangle shape" should be backward pointing. Attach the slide covers so that they are completely flush towards the front tabs of the gliding frame. Step 3: Assemble the shelf trim onto the front of the gliding frame. Push the screws on the back of the shelf trim through the wider part of the holes on the front of the gliding frame and then push the shelf trim to the left in order to lock it into place. Then tighten the screws. Assembly of shoe rack inserts: Step 1: Start from the back. Position the first shoe rack at an angle with the bottom clip positioned to rest on the inner edge of the gliding frame. Press down. Step 2: Repeat on the other side. Step 3: Gently pull the shoe rack on the left/right side, so that it is positioned straight in the frame. Step 4: Repeat with the remaining two racks, working your way forward.