Closet rod holder

Specification

<

Specification

Enhance your closet organization with our closet rod holder. Easily attach it underneath bracket click-ins to fasten the closet rod. The holder allows for joining two closet rods in the holder for increased flexibility. Recommended maximum distance of 900 mm between two closet rod holders.

Product LineClassic by Elfa

Article number

470928

ColorGraphite

Width (mm)35

Depth (mm)43

Height77

Technical description

<

Technical description

Holder for closet rod, to be attached underneath a bracket click-in. Two closet rods can be joined in one holder.

2 metal colours:
White, close to NCS S 0300-N, gloss around 85
“Graphite”, a unique finish close to NCS S 8000-N, gloss around 50
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

When planning in Elfa Planner, the design tool will automatically add closet rod holders when planning a closet rod.

The depth of hangers has been taken into account when the position of the closet rod holder slot in the click-in brackets was set.

* If you are planning a solution with sliding doors, be sure to leave sufficient space between the interior and the sliding doors, to have space for the hanging clothes. In a system based on D:40, we recommend at least 550 mm measured from the back wall to the sliding doors.
* Two closet rods can join in one closet rod holder.
* Do not use a closet rod of more than 905 mm width (W:90) without adding a supporting closet rod holder in the center.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Before you start: Mount the brackets and the wire shelf in the position you have chosen. The slot underneath the click-in bracket can be used for mounting the closet rod holder. Also mount the closet rod end caps, where needed.

Insert the closet rod holder into the slot underneath the bracket, by leaning the bottom of the holder slightly upwards and inserting the upper ""tooth"" of the holder into the slot. Then let the holder come down into place.

Once the closet rod holder is mounted, firmly press down the closet rod into the closet rod holder to lock it into place.

Assembly Instructions