Wire shelf clips

Specification

<

Specification

Enhance your storage capacity within the drawer system with our wire shelf clips. Designed to mount a wire shelf between two drawer system units, creating additional storage space in your system. Note that wire shelves with depths D: 40 and D: 50 are suitable only for drawer systems with D: 54. Come in a 4-pack.

Product LineClassic by Elfa

Article number

230930

Width (mm)14

Depth (mm)23

Height26

Technical description

<

Technical description

Clips to mount a wire shelf between two drawer system units. Come in a set of 4.

Planning rules

<

Planning rules

Wire shelves D:40 and D:50 only suits Drawer systems D:54.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: metal saw (if you need to cut the wire shelf).

Before you start: Finish assembling the drawer system units with frame sides, crossbars and baskets. If needed, cut the wire shelf to the desired width.

Click on the respective clips onto the outer frame sides, by snapping them onto the runners. The U-shaped part of the clip is where the wire shelf mounts, and should be pointing upwards. Aim for one position close to front and one close to the back of the runners.

Then click the wire shelf into place (use the second wire from the edge) in the U-shaped part of the clip.

Assembly Instructions