Wire drawer

Specification

<

Specification

Organize your belongings with our wire drawer, dimensionally designed to fit drawer system units. The drawer offers good ventilation and transparency, providing a clear overview of contents.

Product LineClassic by Elfa

Article number

135210

ColorWhite

Width (mm)327

Depth (mm)527

Height185

Weight Recommendation8 kg

Technical description

<

Technical description

The wire drawer easily mounts into a drawer system unit in corresponding width/depth or into a wardrobe between universal runners. Provides excellent ventilation and transparency for an easy overview.

The drawer is available in different combinations regarding width, depth and height.

Metal colour:
White, close to NCS S 0300-N, gloss around 85
Note: as our finishes are metallic/mixed powder, the NCS codes/gloss aren’t exact.

Planning rules

<

Planning rules

"Planning drawer system unit depths:
Standard depth is 535 mm
Mini depth is 435 mm

Planning drawer system unit heights (height without frame feet, adjustable feet or casters):
4-runner: 440 mm
7-runner: 740 mm
10-runner: 1040 mm

When stacking drawer system units on top of each other, 30 mm is subtracted from the total height. For example:
440 mm + 440 mm = 880 mm – 30 mm = 850 mm.

Adding frame feet increases the total height by 2 mm.
Adding casters increases the total height by 77 mm.
Adding adjustable frame feet increases the total height by 50-63 mm.

Width:
The following drawers and crossbars are available for drawer system units – Standard and Mini:
W: 35
W: 45
W: 55

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

Before you start: Finish assembling the drawer system units (with frame sides and crossbars) or your runners (if you are assembling into a wardrobe).

Slide in the drawers into the runners.

If you are assembling drawers into a drawer system: Add an in/out stop in order from keeping your drawer from pulling completely out.

Assembly Instructions