Adjustable frame feet

Specification

<

Specification

Achieve stability and adaptability with our adjustable feet. Whether you have uneven floors, require higher bases or just want to raise your drawer system unit by 50-63 mm, these feet ensure that your unit remains steady and level. Come in a 4-pack.

Product LineClassic by Elfa

Article number

493720

Width (mm)35

Depth (mm)27

Height50

Technical description

<

Technical description

Adjustable feet for drawer system unit. To be used for uneven floors, high bases or when raising the drawer system unit by 50-63 mm (2 - 2-1/2""). Come in a 4-pack.

Fits any drawer system unit.

Planning rules

<

Planning rules

Add adjustable feet if you have an uneven floor or if you want to raise the drawer system unit.

Adding adjustable frame feet adds 50 mm to the overall height of the frame. It is possible to adjust the height on the feet between 50-63 mm.

Safety and care

<

Safety and care

Safety

Note! Do not place Elfa products in direct contact with water.

Care

Wipe clean with a cloth dampered with a mild cleaner. Wipe dry with a clean cloth.

Assembly Instructions

<

Assembly Instructions

You need the following to assemble: Rubber hammer/mallet.

Before you start: Finish assembling the drawer system with frame sides and crossbars. And before adding drawers to your unit, mount the adjustable frame feet.

Step 1: Turn the drawer system unit upside-down and fasten the rubber box-shaped part onto the crossbar teeth underneath the drawer system unit, using a rubber hammer/mallet.

Step 2: Screw in the adjustable frame feet into the hole in the rubber box, using a clockwise motion. The feet are now secured, so that you can turn the drawer system unit upright again.

Step 3: Adjust the feet to get the drawer system unit level.

Step 4: Insert the drawers.

Assembly Instructions