Additional options

Elfa provides a number of great options to make your sliding door solution even better.

Showing: 7 Additional options

NCS lacquered made to measure side panel


Choose a to have a side panel in optional standard NCS colour. MDF-Panel will be painted on both sides and both long edge sides and cut to your specified measurements. Width: 19 mm Choose depth between: 100-725 mm Choose height between: 100-2800 mm

Side panel


There are a variety of side panels in melamine to match the fillings of your sliding door. They can be cut to desired height or width and are easy to assemble with Mounting angle or Wall profile. The edge strip placed along one side is slightly soft rounded.

Stop bar


Stop bar in foiled MDF, available for Double and Triple track solutions. The colour matches the sliding door filling with the same name. If you want to keep your skirting board when installing sliding doors – place Stop bar above it, or place at the end of the bottom track. Remember to take the depth of the Stop bar into account when measuring your space before ordering sliding doors.

Mounting angle


For assembly of the Side panel. Comes in 4-pack.

Wall profile


Wall profile in white lacquered aluminum. Use for easy mounting and perfect fit of the 19 mm Side panel to the wall.

Opening height reducer


For mounting of top track in an uneven ceiling or to reduce the opening height. Place 100 mm from each end and than at 500 mm interval. Not available together with Soft-closing. Reduce the ceiling height between 90-500 mm.

Slope cut fitting


For mounting of the top track in a sloping ceiling. Place 100 mm from each end and then with 500 mm interval. Not available together with Soft-closing. For 17-55°.